Build yourselves an underbody
after this design. The aluminum corners are supplied by us
Put the
gelbedcover to the base plate. Now the foamrail are inserted into
the gelbedcover. Fasten the foamrails with the provided screws to
the base plate.
.
Stretch the safety
liner over the foamrails.
Insert
the thermal divider in the midle.Put the two Vinylmattresses into
the safty liner.
Now the Vinylmattresses
is filled with water.
Fill on each 1.8 kg of
Gelpuder into the mattress.
mix the Gelpuder
with the water.
Get they air out with the air
extractor from the gelmattress. Close they the system. Now the gel
bed is finished to sleeps.
Wir
Akzeptieren: Vorkasse Nachname
Aqua Viscaya Wasserbetten Zentrale Moordeicher Landstr. 35
